KBS DIAMOND FINISH CLEAR COAT DiamondFinish Clear is a crazy tough Clear Coat that can be applied Direct To Metal or over other coatings. DiamondFinish Clear is a water clear high gloss clear coat that remains permanently flexible and is able to perform in the toughest environments without yellowing, cracking or peeling. Over 60% Solids which Means Ultra Durability Direct To Metal Application - No Additives Needed Ideal Clear Coat for Fiberglass Surface and Carbon Fiber Surfaces. Apply Directly to Painted Surfaces Single Part Formula Tougher, Harder and Easier To Use than 2 Part (2K) Clear Coats Seals and Coats both Paints & Metals Self Leveling (No Brush Marks) Simple Brush, Spray or Roll Application Wet sand, cut, buff, and polish to create a deep mirror finish. Permanent UV Stability - Does Not Yellow or Fade High Chemical Resistance (including some fuels) High Temperature resistance (300F) suitable for Motors and Brake Calipers Once fully cured, DiamondFinish Clear is 100% non-toxic. Graffiti Proof Re-coat in 1-2 hours Seals Ferrous and Non-Ferrous metals
US Dollars
Canadian Dollar
